SIG KADET LT-25 KIT

$108.69

Category: .

Description

Since its introduction, the SIG KADET LT-40 has become the R/C trainer of choice at many club fields, Not long after its introduction, we started getting requests for a smaller version of the same airplane. So the compact version of the LT-40 was born – the SIG KADET LT-25. As you would expect, the new LT-25 inherits all the same gentle flying characteristics of the other legendary SIG KADETS.
It has the same light wing loading, which allows it to fly slow enough to give the student pilot time to think and react. It has the same “hands off” stability on all axis. If the student pilot gets disoriented, simply let go of the sticks and the LT-25 will recover and return to level flight within seconds.
In addition, the new KADET LT-25 has a couple of features that are “firsts” for any SIG KADET.

  • It’s the smallest “full-house” 4-channel KADET we’ve ever produced, with ailerons, elevator, rudder, and throttle control standard.
  • It has a taildragger landing gear! In the interest of keeping the flying weight of this little gem as light as possible, we’ve elected to go with the simplicity of a taildragger landing gear. With a wide-stance main gear and a shallow angle of attack on the ground, the LT-25 takes off and lands just as easily as most tricycle gear models.
  • Last, but not least, it’s the first SIG KADET that is all laser cut! The CAD drawn plans and CNC (computer controlled) laser cutter insure the parts fit perfectly. You’ve never built a kit that went together this good!
Wingspan 63 in 1600 mm
Wing Area 724 sq in 46.7 dm²
Length 50.75 in 1289 mm
Flying Weight 4 – 4.25 lb 1814 – 2041 g
Wing Loading 12 – 13 oz/sq ft 39 – 44 g/dm²
Radio Required 3-Channel with 4 Standard Servos (not included)
Engine Required
(not included)Set Up Specifications 

 

 

 

 

 

 

 

 

 

 

 

 

 

Accessories

 2-Stroke .25 – .32 cu in (4.1 – 5.2 cc)
4-Stroke .20 – .26 cu in (3.3 – 4.3 cc)

Elevator   9/16 inch 14 mm Up and Down
Rudder 1 inch 25 mm Right and Left
Ailerons Up   3/8 inch 10 mm
Ailerons Down   3/8 inch 10 mm
Center of Gravity 3  1/2 inch 89 mm From leading edge
Dihedral 6 degrees 6 degrees Total
Incidence + 1-1/2 degree wing, 0 degree stabilizer
Engine Offset  6 degree down, 0 degree right
English Metric Number Required
Main Wheels 3 inch 76 mm 2
Tail Wheels   3/4 inch 19 mm 1
Fuel Tank 6 ounce 177 cc 1
Spinner 1.75 inch 44 mm 1
Covering 3 rolls depending on trim scheme
KIT FEATURES
  • Light Weight Balsa Structure
  • Strong Wing Design
  • Engine Mounts
  • SIG Easy Hinges
  • Decals
  • Complete Pushrods and Hardware
  • Pre-Shaped Balsa Rudder
  • Easy-To-Build Interlocking Balsa Fuselage
  • Pre-Shaped Balsa Leading Edges
  • Pre-Shaped Balsa Trailing Edges
  • Pre-Shaped Balsa Ailerons
  • Pre-Shaped Balsa Elevator
  • Photo-Illustrated Assembly Manual
  • Formed Aluminum Main Landing Gear
Kadet LT-25 Kit Instruction Manual
Click title to open in a new window.
Complete Pdf (3.0 Mb) Do

Reviews

There are no reviews yet.

Be the first to review “SIG KADET LT-25 KIT”

Your email address will not be published.

Related products